An internal drive on my Xbox 360. I'm still looking for a 1TB HDDSS.bin. Internal HDD for the 360 will remain a 500 GB one. This guide will show you how I did that, its worth mentioning that you can also hack a 20gb, 60gb and 120gb, 250gb, 320gb and 500gb drives, however when creating this tutorial 250gb was the largest drive possible to hack.

Over the past couple of months, I have been on a quest. This quest has led me to many different locales, and it is still ongoing.

Unfortunately, my quest has hit a roadblock of sorts for the moment, but it has not ended. I will explain more on that in a minute, but for now, I wanted to document the things I have found out thus far.

After hours of searching the net for a solution of using a Seagate hard drive in my Xbox, there was not a whole lot of happy news, however I have pieced together many sources, and have been able to change many of the drive’s parameters manually, effectively mirroring the functions of HDDHACKR. This is the main holdup that Seagate drives face. There is no automated way of doing this like there is with a Western Digital Drive. Just for your information, the information in my post is not for the faint of heart, and you probably will kill your hard drive if you are not very careful. I take no responsibility for what you do to your hard drive.

Hddss.bin File For 250gb Drive Windows 7

This is in no way a complete tutorial, nor can I guarantee that this will work for you. My hope is that someone will benefit from the information that I have pieced together.

Hddss.bin File For 250gb Drive Download

The 120GB SS that's floating around on the net is for a fujitsu hard drive, so wouldn't suit my purpose. I've tried taking the 250gb SS which is made for a Hitachi, and hybridize it with the 120gb fujitsu image, but this obviously didn't help. Does ANYONE happen to have a copy of the Hitachi 120GB 360 phat HDD's security sectors? . Dumping the HDDSS.BIN file. Boot to MS-DOS from a writeable medium (like a floppy or UBS Stick). Connect an.original. Xbox360 HDD to your SATA controller. Make sure it is the only SATA device that is connected. Now run 'HDDHackr D PORT A0 HDDSS.BIN' and it will create the file 'HDDSS.BIN' and save it to the path you've started HddHacker from. . Dumping the HDDSS.BIN file. Boot to MS-DOS from a writeable medium (like a floppy or UBS Stick). Connect an.original. Xbox360 HDD to your SATA controller. Make sure it is the only SATA device that is connected. Now run 'HDDHACKR D PORT A0 HDDSS.BIN' and it will create the file 'HDDSS.BIN' and save it to the path you've started HddHacker from.

Even though I have not completed this project, I believe I have found enough information that someone somewhere will have better luck than I have. It is about 2:00 in the morning as I finish typing this, and I am on my way to bed. This is a work in progress, so pictures will come at a later date. For now, I am happy with what has been written, and it will suffice for now. Required Materials -Hex Editor (I use HxD. It’s free, and it works quite nicely. WxHexEditor works nicely for our *Nix friends as well.

You need one that is able to open a physical disc.) -RS232 to TTL Adapter (Max32 or similar. You can even use an Arduino if you don’t have anything else). Jumper wires for adapter-Official Xbox 360 HDDSS.bin FROM a Seagate drive (more on this in a minute, but luckily I have found this for you, and will upload it for you.) -External SATA enclosure (Makes it easier to control the power to your hard drive, without having to take apart your computer.) -A SATA Controller that is compatible with HDDHACKR(We will not be flashing the firmware with this, but we will still be creating the partitions. You can do this manually also, but I will not detail that here) -Plenty of time to experiment, and learn how to navigate the Seagate TMOS.

I will tell you the commands I used to get as far as I did, but some of these commands vary from drive to drive. Even the same model numbers with different firmware revisions will have different command sets. BE VERY CAREFUL PLAYING WITH THESE SETTINGS. Take the time to learn what the commands do for yourself. The biggest mistake I made was trying a command that wasn’t made for my drive, and I have effectively bricked it for the moment. -An Understanding of Hex.

We will be dealing with hex addresses, and hex offsets. It will be much easier to follow if you understand Hex. You will mess something up somewhere along the way. I can almost guarantee it. If you are not a patient person, you will just get frustrated then definitely screw something up. If you are feeling a bit frustrated, do yourself and your hard drive a favor, and take a break.

It won’t do you any good to work on it while you are upset, and you’ll likely mess something else up in the process.-SeDiv (Not a requirement, but highly recommended. You can use Putty or Hyper-Terminal if you wish, but SeDiv is designed for the work that we are doing. Bahasa indonesia adalah. If you do decide to download SeDiv, you will need Windows XP SP2.

It does not work on Windows Vista or 7. You will also need to set your system clock back to 2007 or 2008.) A Little Background Information My first spark of inspiration was this site:. In this thread is a detailed list of how to manually place the security sectors of an official Xbox drive onto a different hard drive. Jacksmith hacked unlimited ore unblocked.

The poster states that he has used this method to use a Seagate drive in his Xbox; however the tutorial itself was performed on a Western Digital drive. After numerous failed attempts at contacting the author of this thread and a few others, I did a bit more digging. In short, what I learned was that when HDDHACKR modifies a hard drives firmware it changes 4 main things in the Hard Drive’s Firmware. These changes are taken from a valid hddss.bin that has been dumped from an official Xbox Hard Drive. • It changes the Model Number • It changes the Serial Number • It changes the LBA • It changes the Firmware Revision After changing these things, it will then copy the information in the hddss.bin file to sectors 16-22 of the hard drive itself. The previous link details the security sector of an official drive, and how it is structured. Basically the Xbox compares the information in these sectors (or the hddss.bin) to the physical drive’s information.

Xbox 360 FAT - Kilka pytan odnosnie Xboxa 360 i Akcesoriow

Jeśli chcesz wrzucić dysk 500GB to upewnij się, że jest to Western Digital i ma jedną z poniższych serii: BEAS/BEVS/BEVT/BPVT/LPVT/BEKT/BJKT/BPKT/BUDT/HLFS/BLFS Programem hddhackr musisz wgrać sektor bezpieczeństwa z załącznika. 725770 Ew. jak masz dysk innej marki to pozostało ci kupić przejściówkę na USB/kieszeń, Xbox obsługuje dyski zewnętrzne do 2TB.

HddHackr_v1.40_Build_20130303.rar
- HDDHACKR.EXE
- ReadMe.txt
- Array

Pobierz plik - link do postu

Hddss.bin File For 250gb Drive Free

HddHackr_v1.40_Build_20130303.rar > ReadMe.txt

Hddss.bin File For 250gb Drivers

HDDHackr v1.40 Build 20130303
** Notes **
-------------
- HDDHackr is made only for real MS-DOS, not for windows command prompt or even windows XP/Vista/7 !!!!
- 99% of problems appears to be Mainboard chipset (SATA Chipset) or some BIOS configurations (RAID, AHCI, LegacyIDE, ...), not HDDHackr app!!
- Use " Bootable_USB_Drive_Creator_Tool " to prepare USB drive to boot into MS-DOS.
- Download package contains approx. 70 recovery files (UNDO.BIN)
Works with the following Western Digital drive series: [BEAS/BEVS/BEVT/BPVT/LPVT/BEKT/BJKT/BPKT/BUDT/HLFS/BLFS]
- WD S